KARDO Waterpanel X
The main component of this system is an insulating base with grooves for easy and quick installation of surface water heating pipes. Underfloor heating made with KARDO Waterpanel X does not require concrete finishing. Enables direct bonding of terracotta tiles with the use of armored mesh and highly elastic glue, guaranteeing stability and proper operation. Made on the basis of XPS polystyrene resin, resistant to high surface pressure, easy to process and moisture resistant. It has excellent thermal insulation properties. Also used for heating walls and ceilings under plasterboards.
KARDO Waterpanel X System for TILES contains of:
- KARDO Waterpanel Xb and Xs boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Waterpanel Flex glue
- Armored mesh
KARDO Waterpanel X System for LAMINATED PANEL contains of:
- KARDO Waterpanel Xb and Xs boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Alumax underlay mat
Board size - 1250 x 600 x 30 mm
KARDO Waterpanel XL
The main component of this system are XPS insulation boards based on polystyrene resin with milled grooves intended for installation of water pipes with a diameter of 16 mm. They have excellent thermal insulation properties. Resistant to high surface pressure, easy to process and resistant to moisture. Used as a wall, floor or ceiling mounting and insulating base additionally covered with an aluminum panel. Aluminum foil with a thickness of 0.045 mm increases thermal conductivity, at the same time shortening the heating time of rooms. Underfloor heating made with KARDO Waterpanel XL does not require laying concrete screeds. The special highly flexible KARDO Waterpanel Proof mortar enables direct bonding of ceramic tiles, ensuring their good adhesion, stability and proper operation while the floor is heated. This type of installation allows you to perform works without technological breaks related to the drying of traditional concrete floors, without generating moisture in the building.
KARDO Waterpanel XL System for TILES contains of:
- KARDO Waterpanel XL boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Waterpanel Proof glue
KARDO Waterpanel XL System for LAMINATED PANEL contains of:
- KARDO Waterpanel XL boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Therm underlay mat
Board size - 1250 x 600 x 30 mm
KARDO Waterpanel E
The main component of the system is a waterproof foamed polystyrene insulation base for easy and quick installation of water pipes in a floor, wall or ceiling heating system. Easy to process and resistant to high surface pressure. Underfloor heating made with KARDO Waterpanel E does not require any concrete mortar. After fusing a special, "armored" fiberglass mesh on the surface into a highly flexible mortar, it enables direct bonding of terracotta tiles, stone, porcelain tiles, etc.
KARDO Waterpanel E System for TILES contains of:
- KARDO Waterpanel Eb and Es baords
- Filling boards
- Pipes with an aluminum insert
- KARDO Waterpanel Flex glue
- Armored mesh
KARDO Waterpanel E System for LAMINATED PANEL contains of:
- KARDO Waterpanel Xb and Xs boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Alumax underlay mat
Board size - 1000 x 500 x 30 mm
KARDO Waterpanel EL
The main component of the system is a waterproof foamed polystyrene (EPS) insulation underlay covered with an aluminum foil lamella for easy and quick installation of water pipes in the surface heating system (floor, wall). Especially recommended under floor panels due to the ease of processing and resistance to high surface pressures. Underfloor heating made with KARDO Waterpanel EL insulation panels does not require any concrete mortar.
KARDO Waterpanel EL System for TILES contains of:
- KARDO Waterpanel EL boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Waterpanel Proof glue
KARDO Waterpanel EL System for LAMINATED PANEL contains of:
- KARDO Waterpanel EL boards
- Filling boards
- Pipes with an aluminum insert
- KARDO Therm underlay mat